CALL 702.400.3460

For Discounted prices

... 7 days a week

Pricing...Call 702.400.3460 for discount pricing

  • DL 1840, DL 1860, DL 1880, DL18120

 
Between Center: 40"/60"/80"/120"
Swing over bed : 18"
Width of bed: 16"
10HP main motor, 220V/440V 3Ø
  49 kinds of inch threads.
  16 speeds from 16-1600 RPM
  D1-8 Camlock with 3-3/16"spindle bore.
  Handwheel can be disengaged rapidly.
  Main spindle hardened and precision ground.
  Bed cast of fine grain high tensile cast iron.
  Bedways induction hardened& precision ground.
  All gears and shafts hardened and precision ground.
  4-way rapid traverse to longitudinal and cross
  Automatic lubrication system in headstock and feed box.
  Main spindle supported at 3-points by precision bearings.
  Full length foot brake, quick and reliable.
     

 Pricing  CALL 702-400.3460 for discount pricing

 DL 2240,  DL 2260, DL 2280, DL 22120

 DL 2660L, DL 2680L, DL 26120 

Swing over bed 22"/26"
Between centers: 40"/60"/80"/120"
Width of bed 16"
  10 HP main motor 220V/440V 3Ø
  49 kinds of inch threads.
  16 speeds form 16-1600 RPM.
  D1-8 Camlock with 3 3/16" spindle bore.
  Handwheel can be disengaged rapidly.
  Main spindle hardened precision ground.
  Bed made of fine grain high tensile cast iron.
  Bedways induction hardened& precision ground.
  All gears and shafts hardened and precision ground.
  4-ways rapid traverse to carriage & cross slide.
  Automatic lubrication system in headstock & feed box.
  Main spindle supported at 3-points by precision bearings.
  Full length foot brake, quick and reliable in action.
   

CALL or Write For Discount Prices
Swing over bed 26"/32"/40"
Between centers: 40"/60"/80"/120"/160"/200"
Width of bed 21 21/32"
  20 HP main motor(15 HP ON DL-26 series only).
  67 kinds of inch threads.
  18 speeds from 7.5 to 1000 RPM
  D1-11 Camlock with 5" spindle bore.
  Main spindle hardened Z& precision ground.
  Bed made of fine grain high tensile cast iron.
  4-way rapid traverse to carriage & cross slide.
  Bed ways induction hardened & precision ground.
  All gears and shafts hardened & precision ground.
  Spindle supported at 3-point by precision bearings.
  Automatic lubrication system in headstock & feed box.
  Hydra-control multi-disc clutch for spindle turning & brake.