Features:
Hardened steel table ways with precision ball bearings for smooth and easy table traverse. Class 7 high precision angular contact ball bearing spindle. One piece heavy cast base for good stability. Automatic lubriaction system. Hardened and ground lead screws for wheel head up and cross movement. Powerful 2 HP spindle motor.
| Model No. | WSG-618 | WSG-818 |
| Table size | 6″ x 18″ | 8″ x 18″ |
| Max. grinding length | 18-1/2″ | 19-3/4″ |
| Max. grinding width | 6-1/2″ | 8-1/4″ |
| Max. distance from spindle to table | 15-3/4″ | 19-3/4″ |
| Max. longitude travel | 19″ | 21-5/8″ |
| Max. cross travel | 7″ | 9″ |
| Longitudinal travel per revolution | 4-1/8″ | 3-15/16″ |
| Cross travel per revolution | .2″ | .2″ |
| Cross travel per graduation | .0008″ | .0008″ |
| Vertical travel per revolution | .05″ | .05″ |
| Vertical travel per graduation | .00025″ | .00025″ |
| Peripheral speed of wheel | 110 FT/S | 110 FT/S |
| Spindle speed | 3600 RPM | 3600 RPM |
| Grinding wheel size | 8″ x 12″ x 1-1/4″ | 8″ x 12″ x 1-1/4″ |
| Spindle motor | 2 HP | 2 HP |
| Dust collector motor | 1/2 HP | 1/2 HP |
| Coolant pump | 0.05 HP | 0.05 HP |
| Lubricating pump | 0.02 HP | 0.02 HP |
| Dimensions (LxWxH) | 55″ x 39″ x 71″ | 59″ x 47″ x 72″ |
| Net weight lbs. | 1600 | 2350 |
Standard Equipment
- Standard Permanent Magnet Chuck.
- Grinding wheel.
- Grinding wheel flange.
- Wheel balance arbor.
- Diamond wheel dresser.
- Working light system.
- Tool box.
- Hoisting set.
- Leveling pads.
- Coolantsystem.